Metalized Film

Higher luster and light reflectivity achieved by utilizing ultra high clarity polyester not normally used outside highly critical applications.

ATSM higher temperature resistance polyester and almost nonexistent shrinkage makes it ideal for high temperature applications. A unique high temperature acrylic adhesive also adds to the products' high performance.

The release paper is balance formulated to the adhesive for best cutting and weeding.

TYPICAL PHYSICAL PROPERTIES

Face Film: 2 mil polyester films, metalized so that the color shows through, with the polyester surface.

Adhesive: 1 mil clear, permanent acrylic based pressure sensitive adhesive which allows bonding to any smooth, clean, and wax-free surface.

Release Liner: 78 lb. silicon release liner protects the adhesive prior to application and allows the film to remain flat in sheet or roll form.

Application Temperature: 50º F.

Peel Adhesive Values:	30 min.	72 hrs.
180º Peel Values	3.5#/in.	4.5#/in.

 
Shear Adhesion: 1000 gram/1" wide.

Opacity: These films will completely hide black legend upon application.

Expected Lifetime: Two (2) years for bright silver. Gold is not recommended for exterior applications.

Storage Stability: Shelf life of one year when stored under 70º F and 50% relative humidity.

*NOTE: Always pretest your specific substrate prior to actual application to determine product performance on that substrate.